Hardware | |
| CPU | RK3288,4 core ARM-A17,1.8GHz RK3288, quad-core ARM-A17, 1.8GHz |
Memory | RAM DDR 2GB (4G is optional) |
Storage | ROM 8GB |
Operating system | Android 7.1.2 |
Display | 8-inch liquid crystal display, resolution: 1280*800@60HZ |
Material | Aluminum alloy |
Performance | |
Identification height | 1.2-2.2 meters |
Identification distance | 0.5-3 meters |
Body temperature measurement distance | 0.5 meters |
Identification technology | Support mask identification + infrared array thermal imaging
temperature measurement |
Face angle | 30 degrees left and right, 30 degrees up and down |
Identification time | 20ms of detection and tracking, and 300ms of feature extraction |
Status display | Name and temperature broadcast and display, custom information
broadcast and display, and three-primary-color status light |
Main control board interface | |
EDP output | 1-channel EDP output supports up to 1920X1080 output |
HDMI output | 1, HDMI2.0 supports up to 4K@60HZ output |
Network interface | 1 RJ45 10M / 100M adaptive Ethernet port |
Touch screen interface | 1-channel ETP input |
Headphone/MIC interface | 1, built-in headphone audio output base (GB: GND,MIC,R,L) |
WIFI (optional) | 1-channel WIFI signal, support 2.4G/5G WiFi, support Wi-Fi
802.11b/g/n protocol |
3G/4G (optional) | Scalable 1-channel 3G (WCDMA, EVDO, CDMA, GSM)/4G
(LTE-TDD/LTE-FDD/TD-SCDMA/EDGE/GPRS/GSM) signal |
SD card interface | Maximum expansion to 64GB TF card |
USB2.0 interface | 4 USB interface bases (1 external, 3 built-in, 3 HOST USB and 1 OTG
USB) |
Output at the time of connection | 1-channel opening output signal |
Wiegand interface | 1-channel Wiegand output supports Wiegand 26-bit and 34-bit
adaptive transmission |
Camera parameters | |
Camera | Binocular MIPI B/W, HDR 2 million pixel camera, automatic exposure,
automatic white balance, and automatic backlight optimization |
Sensor | 1/2.7” industrial-grade binocular high-definition
wide-dynamic-range image sensor |
Frame rate | Maximum 30 frames in black, white and color, no ghosting |
Infrared light spectrum | 850nm |
Effective pixels | 1920*1080/1920*1080 |
Lens | M12(f=3.6MM)/ M12(f=3.6MM) |
Pixel size | 3.0um X3.0um/3.0um X3.0um |
Minimum illumination | ≥0.01LUX at F1.2/≥0.1LUX at F1.2 |
Signal to noise ratio | ≥41dB |
Wide dynamic range | ≥96dB/≥105dB |
Interface type | USB2.0 |
Video coding | H.265 Main Profile coding/H.264 BP/MP/HP coding/MJPEG coding |
Image resolution | Main stream | 640X480@ 30fps /800X600@ 30fps /1280X720@ 30fps/1280X1024@ 30fps/1920X1080@ 30fps /1600X1200@ 15fps /2048X1536@ 15fps |
Secondary stream | 640X480@ 30fps /800X600@ 20fps /1280X720@ 5fps/1280X1024@ 5fps/1920X1080@5fps /1600X1200@ 5fps /2048X1536@ 3fps |
Human temperature measurement parameters | Use the infrared thermal imaging module imported from Germany |
Temperature measurement range | 30-42℃ |
Temperature measurement distance | 0.5m |
Temperature measurement accuracy | ±0.5℃ ideal indoor laboratory environment |
Card reading parameters (optional for external connection) | |
Identification card type | Read M1IC card serial number and ID card serial number |
RF operating frequency | 13.56MHZ |
Operating effective distance | <3cm |
Reading rate | 15 times/second |
General parameters | |
Working temperature | +20℃ - +35℃ |
Working humidity | 10-90% relative humidity, no condensation |
Power supply | DC12V/3A |
Equipment power consumption | ≦25W |
Equipment size | 250* 118*18mm |
Equipment weight | 1.2 kg (depending on configuration) |
